Best Powered Usb Hub For Raspberry Pi Reviews With Products List

Best Powered Usb Hub For Raspberry Pi
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero W V1.3 with 2.4A Power Supply & 1.5m Micro USB Cable with On Off Switch9.8Buy On Amazon
2AuviPal LAN Ethernet Adapter with 3 Ports USB OTG Hub for Streaming TV Stick9.6Buy On Amazon
3Ethernet/USB HUB HAT Expansion Board for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W /2 W/Zero WH/2WH9.6Buy On Amazon
4LoveRPi MicroUSB to USB 4 Port Black OTG Hub for Raspberry Pi Zero9.4Buy On Amazon
5Plugable USB 2.0 4-Port High Speed Hub with 12.5W Power Adapter9Buy On Amazon
6MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W (with Bluetooth & WiFi)9Buy On Amazon
7BYEASY Universal Powered USB Hub8.8Buy On Amazon
8MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux8.6Buy On Amazon
9Raspberry pi 4 Port USB HUB HAT Compatible with USB2.0 1.1 for Various Version of Raspberry Pi Perfectly Fit Zero/Zero W/Zero WH Serial Debugging Onboard USB to UART8.6Buy On Amazon
10Powered HUB, OTG Micro USB Ethernet Network Adapter for Raspberry Pi Zero8.2Buy On Amazon

Table Of Content:

1. MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero W V1.3 with 2.4A Power Supply & 1.5m Micro USB Cable with On Off Switch

  • Modified spring loaded pogo pin locations to support the Pi Zero v1.
  • USB port position rearrangements to provide best adaptability to USB devices in different sizes.
  • Pogo pins and the four supporting poles have been elongated to further increase the headroom between the Pi Zero board and the USB hub board, hence, longer header pins are allowed for the Pi Zero header.
  • This stackable USB hub design is NOT compatible with the older Pi Zero v1.
  • Package Included: 4-Port USB Hub Hat, 2.

2. AuviPal LAN Ethernet Adapter with 3 Ports USB OTG Hub for Streaming TV Stick

  • Add extra Ethernet & USB ports to your device for connecting wired network, wireless keyboard, flash drive or whatever USB peripherals.
  • Solid and Portable – Compact design with black aluminum shell body, Saves space, ideal for storage and travel.
  • 10/100Mbps faster and stable wired Ethernet connection.
  • Plug and play – No driver needed, Set it up in seconds without any extra effort or configuration.
  • Compatible with Streaming TV Sticks, Media Players, Chromecast Ultra /2 /1 /Audio, Google Home Mini, Raspberry Pi Zero.

3. Ethernet/USB HUB HAT Expansion Board for Raspberry Pi 4 B/3 B+/3 B/2 B/Zero/Zero W /2 W/Zero WH/2WH

  • This Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection.
  • It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH.
  • 3x USB ports, compatible with USB2.0/1.1
  • 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
  • Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port

4. LoveRPi MicroUSB to USB 4 Port Black OTG Hub for Raspberry Pi Zero

  • FULL SIZE USB PORTS FOR RASPBERRY PI ZERO: Simple plug and play USB hub for MicroUSB OTG capable devices including HP, Lenovo, Dell, and Acer Computers and Tablets.
  • REQUIRES HIGH QUALITY 1A OR HIGHER POWER CAPABILITY: The host device must provide adequate power to the connected USB devices or the USB devices may not be recognized or disconnect during use.
  • NON-BLOCKING PORTS: Our hub is laid out so that multiple USB devices can be plugged in without blocking each other.
  • FULL SPEED USB 2.
  • AVAILABLE IN BLACK AND WHITE AND PROJECT READY: Need to add USB ports to a Raspberry Pi 0 project? The external case can be disassembled by pulling the top and bottom apart.

5. Plugable USB 2.0 4-Port High Speed Hub with 12.5W Power Adapter

  • 0 4-Port High Speed Hub.
  • Hub enables connecting 4 additional USB devices.
  • Apple notes: Note that some devices such as the Apple SuperDrive look for Apple-specific signaling and will not work when connected through any USB hub.
  • Hub supports the USB Battery Charging 1.
  • Master blue power LED. Sleek piano black glossy finish. Compact and portable design.

6. MakerSpot 4-Port Stackable USB Hub HAT for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W (with Bluetooth & WiFi)

  • 4-Port USB 2.0 Plug-and-Play Hub. Compatible with USB 1.1 and 2.0 devices
  • 0 High Speed, transfer rate up to 480Mbps.
  • Bus-powered from Pi Zero, or powered externally via the Hub’s micro-USB port.
  • Over current protection and LED indication if power rail draws more than 2.
  • Raspberry Pi Zero shown in the photos is for illustrative purpose only and is not included in this offer.

7. BYEASY Universal Powered USB Hub

  • Powered USB Hub Aluminum ] 4-port USB hub applies to various devices: laptop, XBOX, PS4, keyboard, mouse, card reader, HDD, cellphone OTG adapter, printer, camera, USB fan and USB cables, USB hub 3.
  • 5V Power Adapter & Advanced Chipsets ] BYEASY USB 3.
  • Smart Charging Port ] This USB expansion hub come with a fast charging port allows to charge cellphones, tablets, camera and speakers and more, and automatically detects and delivers the optimal charging current.
  • High Speed Data Hub & Great Compatibility ] 4-port USB splitter Supports Transfer Speeds up to 5Gbps (USB 3.
  • BYEASY Accessories ] BYEASY USB 3.

8. MakerSpot Micro USB OTG Hub for Raspberry Pi Zero 4 Port High Speed Sync and Extension Cable Adapter Also Works with Android Tablet Raspbian Jessie Linux

  • Expands into 4 USB Ports for Raspberry Pi Zero v1.
  • Compatible with Samsung Galaxy S2, Samsung Galaxy Note, Samsung Galaxy S3/S4, Galaxy Tab3 8.
  • Draws power only from OTG port, current for USB devices is limited to host capability
  • With USB2.

9. Raspberry pi 4 Port USB HUB HAT Compatible with USB2.0 1.1 for Various Version of Raspberry Pi Perfectly Fit Zero/Zero W/Zero WH Serial Debugging Onboard USB to UART

  • 4 Port USB HUB HAT for Raspberry Pi, USB to UART Onboard
  • 4 USB Ports, compatible with USB2.0/1.1
  • Onboard USB to UART, convenient for Raspberry Pi serial debugging
  • Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port

10. Powered HUB, OTG Micro USB Ethernet Network Adapter for Raspberry Pi Zero

  • Host OTG cable to 3 USB & LAN adapter — Adds additional 3-Port OTG USB extension; Adds 10/100 Mbps wired internet connectivity.
  • Driver-less design for Windows 8.
  • Compatible for Raspberry Pi 2, Amazon Fire TV Stick, notebook, Tablets, and computer with one available micro-b port.
  • Built-in DC power port, supports 5V power adapter, a power cable included; It only powers USB 2.
  • It has limited Android compatibility.