Best Rc Steering Servo – Available For You

by
Best Rc Steering Servo
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY9.8Buy On Amazon
225KG Digital Servo Full Metal Gear High Torque Waterproof for RC Car Crawler Robot Control Angle 270°9.8Buy On Amazon
3ANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed Stainless Steel Gear High Torque Waterproof Standard Baja Servos (270 Degrees)9.8Buy On Amazon
4BETU 45Kg Coreless Servo Motor HV 8.4V9.6Buy On Amazon
5FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo9.2Buy On Amazon
6SunFounder 20KG Servo Motor Waterproof High Torque Servo9.2Buy On Amazon
7BETU 2Pack 25KG High Torque RC Servo，Waterproof servo Compatible with 1/6，1/89Buy On Amazon
8BETU 35KG Coreless High Torque Servo，Waterproof Full Servo Compatible with 1/6，1/89Buy On Amazon
9ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY8.8Buy On Amazon
10ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)8.2Buy On Amazon

Table Of Content:

1. ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY

ZOSKAY 35kg high Torque Coreless Motor servo Metal Gear Digital and Stainless Steel Gear servo arduino servo for Robotic DIY,RC car (Control Angle 270°)Buy On Amazon
  • DS3235 35KG Coreless Stainless Steel Gear Waterproof Digital Servo
  • High reliability、good stability、strong adaptability, Low noise、small vibration、smooth operation、long life.
  • Copper & Aluminum / Stainless Steel & Aluminum
  • High performance digital standard servo,High-precision metal gears （Stainless steel gear）with hard anodizing.
  • CNC aluminium middle Shell,Dual ball bearings

2. 25KG Digital Servo Full Metal Gear High Torque Waterproof for RC Car Crawler Robot Control Angle 270°

25KG Digital Servo Full Metal Gear High Torque Waterproof for RC Car Crawler Robot Control Angle 270°Buy On Amazon
  • Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.
  • Excellent Quality Steering Servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof.
  • Widely Use Digital Servo】The servo (Control Angle 270°) Compatible with 1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models.
  • High Torque Waterproof Servo】Waterproof performance: IP66.
  • Metal Servo Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g)

3. ANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed Stainless Steel Gear High Torque Waterproof Standard Baja Servos (270 Degrees)

ANNIMOS 35KG Coreless Digital Motor Servo 7.4V High Speed Stainless Steel Gear High Torque Waterproof Standard Baja Servos (270 Degrees)Buy On Amazon
  • Used For: 1/10 1/8 scale Crawler / Buggy / Truck and any application where waterproof standard servos are used.
  • The Coreless motor provides high speed, response, incredible efficiency and low power consumption.
  • High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision, control is more delicate and smooth operation.
  • High performance digital standard servo
  • Full waterproof servo to maintain good water tightness in wet conditions.

4. BETU 45Kg Coreless Servo Motor HV 8.4V

BETU 45Kg Coreless Servo Motor HV 8.4V, High Torque RC Digital Servo，Full Waterproof Servo, Stainless Steel Gear Servo with 25T Servo Horn（180°）Buy On Amazon
  • Metal Gear Coreless Servo: Equipped with strong copper & Stainless Steel Gears, CNC aluminium Shell, Less Noise, light weight.
  • Waterproof Servo: Waterproof performance: IP67 (Please watch the waterproof test video).
  • Widely Use Digital Servo: The steering servo (Control Angle 180°) Compatible with 1/5,1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models.
  • High Speed Servo Standard Size: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm); Weight:2.7oz (79g)

5. FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo

FEETECH 35KG Servo Motor 7.4V High Voltage Waterproof High Torque RC Servo Full Metal Gear Digital Servo, Aluminium Case, Control Angle 180° for 1/8 1/10 RC Cars, TRAXXS x4, Baja, RC4WD, GTR and MoreBuy On Amazon
  • HIGH QUALITY SERVO: FT5330M servo motor is composed of a sturdy PA aluminum middle shell, a strong steel metal gear, and a hard iron shaft, provide higher stability and provide longer service life.
  • GREAT COMPATIBLE MOTOR: The servo motor system is controlled by pulse, compatible with 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system.
  • SERVO PROTECTION MECHANISM: The steering gear has IP54 waterproof performance and ball bearings.
  • HIGH ROTATION SPEED SERVO: A high-torque servo, the rotation angle is 180 degrees (at 500→2500μsec), when the power is stopped, it can rotate 360 degrees.
  • STRONG STALL TORGUE MOTOR: The operating voltage range is 4V-8.

6. SunFounder 20KG Servo Motor Waterproof High Torque Servo

SunFounder 20KG Servo Motor Waterproof High Torque Servo, SF3218MG Metal Gear Digital Servo, Aluminium Case, Control Angle 270° for RC Robot CarsBuy On Amazon
  • Large Torque – 20KG Servo Motor 20.5kg·cm (284.7oz·in) -22.8kg·cm (316.63oz·in)
  • High Rotation Support Waterproof- 270 degree rotation.
  • High Precision – Using dual ball bearings design and advanced potentiometer to make sure the high linearity and accuracy of the servo.
  • Good Heat Dissipation – Make of CNC aluminium alloy case in order to cool the servo motor when it is working.
  • Dimensions – 1.58*0.79*1.60 ininch (40.0*20.5*40.5mm);Weight: 56g (1.98oz)

7. BETU 2Pack 25KG High Torque RC Servo，Waterproof servo Compatible with 1/6，1/8

BETU 2Pack 25KG High Torque RC Servo，Waterproof servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car, Full Metal Gear Steering Servo with 25T Servo Horn（270°）Buy On Amazon
  • 2 Sets 25KG RC Servo, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat.
  • Servo Equipped with strong Aluminum gear, iron core motor, CNC aluminum middle shell.
  • The steering servo’s Dimensions:1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm); Weight:2.64oz (75g).
  • Waterproof servo, Full metal gear, Less noise, light weight, Running degree 270°
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment.

8. BETU 35KG Coreless High Torque Servo，Waterproof Full Servo Compatible with 1/6，1/8

BETU 35KG Coreless High Torque Servo，Waterproof Full Servo Compatible with 1/6，1/8, 1/10, 1/12 Truck, RC Car, Metal Gear Servo with 25T Servo Horn（180°）Buy On Amazon
  • Excellent Quality steering servo: Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof.
  • Widely Use Digital Servo: The servo (Control Angle 180°) Compatible with 1/6，1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models.
  • High Torque Waterproof Servo: Waterproof performance: IP66.
  • Metal Servo Servo Standard Size: 40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in); Weight:60 g (2.12 oz)

9. ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY

ANNIMOS 20KG Digital Servo High Torque Full Metal Gear Waterproof for RC Model DIY, DS3218MG,Control Angle 270°Buy On Amazon
  • Upgraded Version – advanced linearity and accuracy with precision potentiometers,stable,low noise,water-proof.
  • Large Torque – maximum torque is up to 21.5 kg/cm (298.5 oz/in)@6.8V
  • High Quality – equipped with strong copper & aluminum gears,CNC aluminium middle Shell
  • High Rotation – well-controlled, 270 degree rotation.
  • Dimensions – 1.58×0.79×1.60inch (40x20x40.5mm);Weight: 60g (2.12oz) only

10. ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)

ZOSKAY Servo High Torque Metal Gear Standard Digital Servo 25KG/0.13S 6.8V for 1/8 1/10 RC Cars(Control Angle 180)Buy On Amazon
  • 25KG servo – maximum torque can up to 25kg.cm (6.8V)
  • Digital servo features HV high torque, metal gear, fast heat dissipation, sensitivity and responsiveness.
  • High- metal gear with hard anodizing for better accuracy CNC aluminium middle shell enhances heat dissipation and longer service life.
  • High Quality – equipped with strong copper & aluminum gears,CNC aluminium middle Shell，made of first-grade material.
  • Standard servo size:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in) 1/8 1/10 scale car