Best Receiver Hitch Winch Mount Based On Ratings

Best Receiver Hitch Winch Mount
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Extreme Max 5600.3084 Universal 2" Receiver Hitch Winch Mount for ATV / UTV9.8Buy On Amazon
2Guide Gear Universal Winch Mount for ATV9.6Buy On Amazon
3OFF ROAD BOAR Universal Winch Mount Plate - 15000Lbs Capacity Winch Mounting Hitch9.4Buy On Amazon
4PLIOSAUR Winch Mount Plate - 15000Lbs Capacity Winch Mounting Hitch9.2Buy On Amazon
5BUNKER INDUST Receiver Hitch Winch Cradle Mount Plate9Buy On Amazon
6KFI Products (100620 2" Universal Receiver Carrier Mount with Handle8.8Buy On Amazon
7ORCISH Bumper Hitch Receiver Winch Mount Mounting Plate8.6Buy On Amazon
8Driver Recovery Products Bumper Hitch Receiver Winch Mount Mounting Plate8.6Buy On Amazon
9X-BULL Universal Winch Cradle Mounting Plate for Recovery Winches8.4Buy On Amazon
10Rough Country 2" Receiver Hitch - Winch Plate Cradle - 1/4" Steel - Handles - 4.5x10 Bolt Pattern - RS1098.2Buy On Amazon

Table Of Content:

1. Extreme Max 5600.3084 Universal 2″ Receiver Hitch Winch Mount for ATV / UTV

  • Winch mount fits any 2″ receiver hitch for multiple applications: ATV, UTV, lawn and garden equipment, etc.
  • Universal design, pre-drilled for 2 and 4-bolt winches, and hawse or roller fairleads
  • Heavy gauge powder-coated steel mounting plate fit winches up to 3600 lbs.
  • Plate Dimensions: 5-5/8″ wide x 6-1/8″ length

2. Guide Gear Universal Winch Mount for ATV

  • WINCH MOUNT – The truck hitch allows you to connect a 2-bolt or 4-bolt winch to your truck, ATV or UTV.
  • UNIVERSAL – The winch cable mount is compatible with any 2” receiver for use on ATVs, UTVs and trucks.
  • DURABLE – Made from a powder-coated steel that’s resistant to weather, corrosion and rust.
  • STRONG – The tow hitch mount has a tensile strength of 3,500-lbs.
  • EASY INSTALLATION – The portable winch mount is pre-drilled for 2 and 4-bolt winches and made for easy installation on any vehicle.

3. OFF ROAD BOAR Universal Winch Mount Plate – 15000Lbs Capacity Winch Mounting Hitch

  • Premium Choice】: The winch mounting plate applies fabricated steel in the manufacturing of this winch mount for ultimate strength and rigidity, and corrosion-resistant housing for superior durability.
  • Flexibility & Compatibility】: This winch mount hitch reciever is suitable for standard 10″x4-1 / 2″ winch rated between up to 8,000 -15,000 pounds winch;.
  • Easy to Store】: The folding size of this hitch winch mount is 13.
  • Multiple Installation Methods】: There are 3 screw mounting holes on both sides of the base, and the installation method can be selected according to actual needs;This specially engineered winch mount can be easily mounted to both front and rear of the vehicle, which could greatly expand its versatility in use.
  • Suitable for Most Vehicles】: The standard universal size ensures that the mounting plate is suitable for any four-wheel drive vehicle: truck, ATV, 4×4, trailer, etc.

4. PLIOSAUR Winch Mount Plate – 15000Lbs Capacity Winch Mounting Hitch

  • Mounting Dimension:Suitable for standard 10 “x4-1/2” mounting plates
  • Product material:The mounting plate is made of high-strength steel for ultimate strength and rigidity, while the housing is black rust resistant powder coated for corrosion resistance.
  • Capacity range:Suitable for 8000 to 15000 lbs winches
  • Installation method:The installation method is simple and easy to use, and can be directly installed on the frame.
  • Suitable Vehicles:Standard universal dimensions ensure mounting plates are suitable for trucks, ATV, 4×4, trailers, and any 4WD vehicle.

5. BUNKER INDUST Receiver Hitch Winch Cradle Mount Plate

  • UNIVERSAL WINCH MOUNT PLATE—Winch mount bracketprovides a solid mounting place for your winch,allowing you to attach a winch to your ATV, UTV or truck.
  • STANDARD FIT—This receiver hitch winch mount plate is equipped with a standard 2-inch shank and has three mounting holes for an adjustable design, which fit any industry-standard 2-inch x 2-inch trailer hitch receiver (hitch pin not include).
  • DURABLE CONSTRUCTION—Features a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state.
  • PROTECT YOUR WINCH—This winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.
  • FRONT OR REAR MOUNTED—This trailer hitch accessory can be mounted on the front or rear of the vehicle, wherever a standard 2-inch receiver is properly installed.

6. KFI Products (100620 2″ Universal Receiver Carrier Mount with Handle

  • 100% MADE IN USA
  • Constructed of 3/16″ GR50 steel and powder coated black
  • Works with most standard 2″ Receiver Hitches
  • Requires a winch that comes with the Fairlead Bracket.
  • Heavy Duty Welded 1-Piece Design

7. ORCISH Bumper Hitch Receiver Winch Mount Mounting Plate

  • Heavy Duty Steel Construction:This winch mounting plate Features heavy duty steel a durable black powder coating, even put it outdoor or wet by rain for a long time, our winch mounting plate can be guaranteed not to rust easily and keep the original state, insures its long lifespan.
  • 15,000 Large Carrying Capacity:Perfect for 8000 lb to 15000lb winches, heavy duty construction and is designed to mounting a self recovery winch to your vehicles.
  • Easy Installation:Package includes hitch pin and clip, as well as 10″ on center fairlead bolt pattern and 10″ x 4 1/2″ standard winch mount pattern ensure the installation is more convenient.
  • Folding Design for Easy Carry and Store:The folding size of 13.
  • Professional after-sales team: All kits are provided with lifetime technical support and one-year limited warranty.

8. Driver Recovery Products Bumper Hitch Receiver Winch Mount Mounting Plate

  • Heavy-duty: Made of 3/16″ high strength steel
  • Universal: Standard 10″ x 4-1/2″ winch mount pattern
  • High capacity: Ideal for 8000 lbs. to 13,000 lbs. winches
  • Long lasting: Finished with an anti-rust power coat
  • Easy to install: Mounting hardware pack included

9. X-BULL Universal Winch Cradle Mounting Plate for Recovery Winches

  • 10″ x 4-1/2″ standard winch installation mode for 8,000 to 15,000 pound winches
  • The handle in the center guide bolt mode is not adjustable.
  • Rust-proof black powder finish made from 1/5 inch steel.
  • Suitable for truck, ATV, 4×4, trailer and any four-wheel drive vehicle.
  • Guarantee: x-bull promises that you will receive the photos exactly as described!

10. Rough Country 2″ Receiver Hitch - Winch Plate Cradle - 1/4″ Steel - Handles - 4.5×10 Bolt Pattern - RS109

  • Heavy Duty 1/4″ Steel | 1″ OD Solid Handles.
  • Center Bracket Fully Welded.
  • Fits up to 12,000 LB Winches | 4.5×10″ Bolt Pattern.
  • Black Hammertone Powder Coating.
  • Backed by Rough Country for 3 Years